|
Grease pumps LAGG series
Meeting all your grease lubricator
needs
Full range of manual and air-operated
grease pumps are designed to empty standard 18, 50 or 180 kg (39, 110 or
400 lb) grease drums. Can be connected directly on the greasing points,
also suitable for centralised lubricating grease systems. SKF grease
pumps have a maximum pressure of 50 and 42 MPa (7,250 and 6,090 psi)
respectively. Tested and approved for SKF greases. Easy to install and
ready for use since pumps are supplied with all necessary items
including 3 500 mm (137.8 in) of tubing.
-
Full range; pumps available for 18, 50
or 180 kg (39, 110 or 400 lb) drums
-
High pressure; maximum of 50 MPa
(7,250 psi)
-
Easy to install; all necessary items
as well as 3.500 mm (137.8 in) of tubing are included
-
Reliable; tested and approved for SKF
greases
-
Can be used in combination with SKF
bearing packer VKN 550
1 kg grease pump LAGG 1M
Contamination-free grease lubrication
The manual grease pump LAGG 1M facilitates
clean and easy grease lubrication of bearings. The pump has been
especially designed for use in combination with SKF 1 kg grease cans. It
seals the grease can, minimizing grease contamination and slowing down
the oxidation process.
The LAGG 1M is suitable for use with greases of consistency classes
ranging from 1 up to 3 NLGI.
-
Airtight seal of the grease can, which
slows down the oxidation process.
-
Greatly minimizes the risk of grease
contamination when compared to lubrication by operator's hand out of
the grease can.
-
The pump is equipped with a locking
mechanism.
-
The design of the pump helps ensure
that virtually no residual grease remains in the can, making it
economic to use and environmentally friendly.
-
Minimizes user skin contact with the
grease, which reduces the possibility of an allergic reaction to
petroleum-based products.
-
Tested and approved for use with all
SKF bearing greases.
-
Sturdy design for long service life.
Grease filler pumps LAGF series
High quantity grease packer
SKF filler pumps are suitable for filling
grease guns. Especially designed for use on grease gun 1077600 and LAGH
400. Tested and approved for SKF greases. Easy to install and ready for
use. Available for standard SKF 18 and 50 kg (39 and 110 lb) drums.
-
Quick filling: low pressure allows
higher stroke volume
-
Easy to install: all necessary items
are included
-
Reliable: tested and approved for all
SKF greases
-
Can be used in combination with SKF
bearing packer VKN 550
Bearing packer VKN 550
Contamination free grease filling
The SKF bearing packer, VKN 550, is a
sturdy, easy-to-use, efficient and effective bearing grease packer.
The SKF bearing packer can also be used in combination with a standard
grease gun, air-operated grease pump or grease filler pump.
-
Flushes the grease between the rolling
elements where it matters most, prolonging the bearing service life.
-
Closed system and the cover lid
prevent ingress of dirt virtually eliminating contamination
-
Allows the operator to pre-fill
bearings with grease in a quick and clean way
-
Prevents unnecessary grease loss
-
Economical and environmentally
friendly
Although specially designed for taper
roller bearings, the SKF bearing packer works for any type of open
bearing which needs to be 100% pre-filled with grease.
Grease meter LAGM 1000E
Accurate grease quantity measurement
for adequate lubrication
It is generally difficult to determine the
correct quantity of grease when manually lubricating bearings, either
using a grease gun or pump, which can result in either over- or
under-greasing the bearing. Both of which can negatively influence the
bearing's service life and possibly result in machine breakdown.
The SKF grease meter LAGM 1000E accurately
measures grease discharge in volume or weight, in both metric (cm³ or g)
and US units (US fl. oz or oz). It has a high maximum pressure of 70 MPa (10,000
psi), making it ideal for use in combination with many
types of grease guns and pumps.
-
Measures grease discharge in volume or
weight, making conversion calculations unnecessary
-
High accuracy facilitates adequate
bearing lubrication, reducing the risk of over- or under-greasing
-
Suitable for all SKF bearing greases
of consistency classes up to NLGI 3
-
An oil and grease resistant rubber
sleeve protects the electronics in case of impact
-
The backlit LCD displays large and
clear-to-read digits, including "low battery" indication
-
Small, compact and lightweight design
- only 0,3 kg (0.66 lb)
-
Corrosion-free aluminum housing
-
Easy to install and use
Grease gun 1077600
Easy grease filling
The SKF grease gun is ideal for the
agricultural, industrial and construction industries and for private
use. The SKF grease gun is delivered with a 175 mm (6.9 in) long
extension pipe with hydraulic gripping nozzle. A flexible 500 mm (19.7
in) long pressure hose with hydraulic gripping nozzle is available as an
accessory.
-
For use with cartridges and loose
grease
-
Rigid hinging system offers
long-lasting use
-
Knurled body for firm and safe grip
-
High quality steel is dent-resistant
for easy cartridge loading
-
Special piston design for smooth
emptying of cartridges
-
40 MPa (5,800 psi) maximum pressure
-
1,5 cm³ (0.092 in³ ) volume/stroke
-
Also available with a with 300 mm (12
inch) high pressure hose with a hydraulic gripping nozzle, 1077600H
-
A complete set, including 3 extension
pipes, high pressure hose, packed in a carrying case is also
available
One hand operated grease gun LAGH 400
Easy grease filling with one hand
Suitable for grease filling by filler
pumps/grease pumps and also suitable for grease cartridges. Ergonomic
design, flexible hose and possibility to mount the hose in both vertical
and horizontal position make it ease to use.
-
Easy to use: only one hand is needed
to operate the gun
-
Refillable: grease filling nipple and
de-airing valve allow filling up by filler or grease pump
-
Heavy duty: operating pressure up to
30 MPa
-
0,8 cm³ (0.05 in³) volume/stroke
-
Flexible hydraulic type hose: can be
bent, can be mounted both horizontally and vertically on the gun
Grease packer LAGP 400
To lubricate open bearings
The grease packer LAGP 400 is a low
pressure alternative for emptying SKF grease cartridges.
It provides an easy and clean alternative to manual grease packing of
open bearings.
Disposable grease resistant gloves TMBA
G11D
Skin protection when handling grease
Specially designed to protect the skin
when working with SKF bearing grease. The gloves are packed in a handy
box containing 50 pairs.
-
Non-powdered nitrile rubber gloves
-
Close fitting for precision wear
-
Excellent resistance against bearing
greases
-
Non-allergic
|
