|
| |
|
Single point automatic lubricators
LAGD 125 and LAGD 60
More reliable and easier to use SYSTEM 24®
Poor lubrication can considerably reduce the service life of
the best of bearings. With that in mind, SKF has enhanced the
performance of the single-point automatic lubricator: SYSTEM 24.
The lubricator’s increased reliability and ease-of-use are a
result of the following:
Product enhancements:
While enhancing the
reliability and ease-of-use,SYSTEM 24 still offers you
the features and benefits you have to come to expect
from SKF automatic lubricators.
-
Flexible time setting period ranging
between 1 and 12 months
-
High reliability and dispense rate
accuracy allow fit and forget procedure until
predetermined replacement date
-
Transparent lubricant container allows
visual inspection of dispense rate
-
High capacity, compact size permits
installation in restricted areas
-
Redesigned non-return valve of the
oil-filled SYSTEM 24 is less sensitive to vibration,
minimising the risk of leakage
-
Available filled with various high
quality SKF greases and oils, which are especially
developed for a wide range of bearing applications
-
Dispense rate setting is a simple part
of the installation process
-
Hermetic sealing prevents ingress of
dirt or foreign matter
-
Allows low grease dispense rate
-
Available in two sizes: 125 ml (LAGD
125) and 60 ml (LAGD 60)
-
Can be temporarily deactivated
-
Wide range of accessories is available
|
|
SYSTEM MultiPoint automatic lubricator
LAGD 400
Multiple grease lubrication points made easy
The lubrication of bearings with the correct type and
quantity of grease is essential for trouble-free operation.
Research has shown that 36% of all bearings fail prematurely due
to incorrect lubrication. Especially for installations with
multiple lubrication points, this can be a time-consuming and
costly process. SYSTEM MultiPoint, SKF's centralised automatic
lubricator, is the most user-friendly and cost-effective
automatic lubricator for multiple grease lubrication points
available today. Its compact design, combined with
electronically controlled accuracy, makes it an excellent
solution for longer bearing-life and increased uptime of your
machinery.
Being a do-it-yourself lubrication system, SYSTEM MultiPoint
can be easily installed without the assistance of a costly
lubrication service company and requires no special training to
use. Once the correct grease dispense rate for your application
is calculated using DialSet, SKF's re-lubrication calculation
program, SYSTEM MultiPoint will keep up to eight lubrication
points simultaneously and automatically lubricated, preventing
both over and under-greasing. The transparent cartridge housing
allows for easy inspection, while an electronic alarm will warn
you when the grease cartridge is empty.
Advantages:
-
Do-it-yourself centralised lubrication
system
-
Up to 8 feed lines
-
Easy-to-use
-
DialSet included: SKF's re-lubrication
calculation program allowing accurate calculation of the
correct re-lubrication intervals
-
Long feed lines (maximum up to 5 m/16
ft)
-
Electronic setting and read-out of
control parameters
-
Alarm function for blocked feed lines
and empty cartridge
-
Machine steering (i.e. lubricator only
operates while machine is running)
-
High pressure capability (40 bar / 600
psi)
-
Tested and approved with all SKF
greases
-
Uses standard SKF grease cartridges
(420 ml)
-
Ready for use, all accessories included
|
|
SYSTEM MultiPoint automatic lubricator
LAGD 1000 series
Centralized lubrication for up to 20 lubrication points
The SKF SYSTEM MultiPoint automatic lubricator LAGD 1000 is
a reliable centralized lubrication system offering lubrication
solutions for bearings and machinery. The LAGD 1000 uses a
high-pressure pump and a progressive feeder for lubricating from
6 to 20 lubrication points. Supplied as a complete ready to use
kit, all accessories required are included in the box.
-
Suitable for greases from NLGI 000 to
NLGI 2, offers high flexibility in types of lubricants
that can be used
-
Sturdy, robust design with IP65 rating,
suitable for most industrial environments
-
Transparent reservoir, allows visual
monitoring of lubricant level
-
Progressive divider so that exactly the
same amount of grease reaches each lubrication point
-
1 litre (33,8 US fl. oz) refillable
grease container, increases intervals between re-filling
-
Extensive programming options, allowing
flexibility to suit most applications
-
Empty container alarm, helps reduce the
risks associated with lack of lubrication
-
Wide temperature range, helps meet a
variety of tough operating conditions, year round
-
Cycle switch function (not on battery
version) notifies operator of blocked outlets so that
proper action can be taken
-
Battery powered version available, no
need for external power source, can be used most
anywhere
|
|
Oil Leveller LAHD series
Automatic adjustment for optimal oil lubrication
level
SKF Oil Levellers, LAHD 500 and LAHD 1000, are designed for
automatic adjustment of the optimal oil lubrication level within
a bearing housing, gear box, crank case or similar oil bath
lubrication application. Not usually possible, SKF Oil Levellers
allow you to effectively adjust the correct oil level during
running conditions, optimising machine performance and
increasing the service life of the applications. Furthermore,
they automatically compensate for oil leakage and offer the
possibility of visual inspection of the oil level.
How it works
The SKF Oil Leveller consists of two communicating oil
reservoirs. The lower reservoir is in direct contact with the
application and hence its oil level is the same as the oil level
inside the application. Through a ventilation tube, the lower
reservoir is also in direct contact with the ambient air.
The upper reservoir is an airtight container storing replacement
oil. Through its extended neck, which dips into the oil of the
lower reservoir, the two reservoirs are in direct contact with
each other. However, oil can only flow from the upper to the
lower reservoir once the oil level in the lower reservoir goes
below the pre-set level, allowing air to flow through the
extended neck to the upper reservoir.
-
Optimally maintained oil level provides
adequate lubrication
-
Easy visual inspection
-
Extended relubrication intervals. LAHD
1000 compensates for evaporation losses of up to 1 litre
of lubricating oil!
-
Oil must be refilled manually
|
|
